1.5" Tall vinyl decal (Shipping included)

THIS IS NOT A STICKER?

This is a vinyl decal.

It's a durable, all weather decal that wont fade like normal stickers. use it to add the VINCO Precision logo to; Cups, Cars, Trucks, Scopes, etc.

VINYL DECAL APPLICATION

• Clean the surface.
• Clean and dry the area thoroughly. Remove any dust, dirt, oil, or wax.
• Position the decal.
• Place the decal where you want it and make sure it is straight before applying.
• Peel the backing
• Slowly peel away the paper backing, leaving the decal attached to the transfer tape.
• Apply the decal
• Place the decal onto the surface and press firmly from the center outward to help prevent bubbles.
• Press it down
• Rub firmly over the entire decal using a squeegee, credit card, or your fingers.
• Remove the transfer tape
• Slowly peel the clear transfer tape back at a sharp angle. If the decal starts to lift, lay the tape back down and press again.

TIP: For best results, apply to a clean, smooth surface at room temperature. Allow the decal to fully adhere before washing or exposing it to harsh conditions.

Thank you for your purchase!